House Plant Guides

Anthurium Villenaorum Care (👉Step By Step Ultimate Guides For You👈)

Anthurium Villenaorum Care: Today, we will be looking at Anthurium Villenaorum, a herbaceous evergreen. This is my latest Anthurium addition and quickly became my favourite due to the simple plant care.

It can grow in a variety of soil types. You can either use a peat-based soil mixture or a soilless medium such as moss and bark. It thrives in humidity above 80% or at least 65%. Before adding water, let the soil’s top inch dry out completely.

This plant is from the Araceae tribe in Peru. It will thrive in your living space and will bloom happily.

The leaves are a mix of dark and light greens with prominent veining. This is an Anthurium discovery. It is still being described formally.

Anthuriums are the longest-blooming plants; they can be found up to five times a year.

This Anthurium type looks very similar to Anthurium Regale, however, Anthurium Villenaorum is smaller in size.

This plant is considered one of the easiest velvet leaf Anthuriums. This guide will provide information about common problems and basic care instructions for this plant.

Anthurium Villenaorum Summary

You need light: Indirect sunlight, medium to bright
Watering requirements: Water the soil when it is at its top 25%. Check it twice per week.
Fertilizer: High nitrogen feed once a month during summer.
Soil: Extra perlite added to the compost makes it very draining.
Humidity: 60-70%.
Temperature: 18degC to25degC (64-77degF).
Where to Buy: These Rare Plant Shops are worth a try.
Common issues Low humidity

Anthurium Villenaorum Basic Plant Care

See the source image


The soil requirements of this plant are not too severe. It can also be planted in soilless materials such as bark or moss. My Anthurium Villenaorum was planted in a peat mixture. This allows it to receive the nutrients it needs for better growth.

Mixing potting soil, orchid dirt, and perlite can create the perfect mix for your Anthurium Villenaorum. Any soil can be used as long as it drains quickly and is well-aerated.

The velvety leaves can be used to decorate your patio or outdoor garden.

Anthurium Villenaorum Watering

It does not require extra watering due to its medium water needs. After you bring your plant home from the nursery, don’t drown it in water.

Summer and spring should be watered as soon as the soil is dry to the top. You should add water until the soil begins to drain from the holes.

The temperature and the amount of light that your plant is exposed to will also affect how much water you need. The more light and temperature your plants receive, the more water they will need. These Anthurium varieties show clear signs of water stress and thirst.

  • Yellow, curled leaves
  • Droopy leaves or wilted plants
  • Instead of regular green leaves, grey coloured leaves are used

You should change the watering schedule if you see any of these signs.

Anthurium Villenaorum Light Requirements

The beautiful Anthurium is happy to live in partial shade. You can place it in a semi-shade, so it can be grown in any location.

Simply put, this plant can be placed anywhere in your home that receives bright, but filtered sunlight.

This epiphyte grows in the shade of other plants, much like Orchids. It is therefore not used to high levels of sunlight.

This plant needs light and humidity to thrive.


The majority of records show that this Anthurium can be found as an epiphytic at low elevations in the San Martin region.

READ ALSO:   Pink Panther Plant Care (👉7 Proven Ultimate Guides For You👈)

It needs to grow at optimum temperatures. This tropical plant should be grown at temperatures between 61 and 76 degrees Fahrenheit (16.5 to 24.5 degrees Celsius).

Related Articles


This species is endemic to Peru and requires high humidity conditions. The ideal indoor humidity level should be between 65 and 70%. Higher humidity is possible, but this can be difficult to maintain and tolerate for residents.

It is best to keep the plant in an area with good air circulation, such as a greenhouse or terrarium. Because the humidity in this plant is higher than in other areas of the house, it will be a great bathroom decor.

Although you can place your Anthurium anywhere, I recommend running the humidifier sometimes.

Anthurium Villenaorum Fertilizer

Anthurium Villenaorum does not require a lot of fertilizer, but it can still benefit from some mild fertilizer. An all-purpose fertilizer for houseplants can be used at quarter strength. Make sure to choose a fertilizer specifically for Anthuriums.

Anthurium Villenaorum Pruning

Anthurium Villenaorum is very compact during its entire life span. It is unlikely that it will take over your indoor or outdoor space. Regular pruning is a good way to keep the plant small and neat.

Use protective gloves to remove dead or diseased leaves. Clean equipment is recommended. To protect Anthurium Villenaorum against pruning shock, do not perform any heavy pruning.



You can propagate your Anthurium plants in water if you are having trouble creating a soil mixture. Beautiful decorative pieces can be made from water-grown Anthuriums grown in glass containers.

  • Fill a small glass jar or cup with distilled water.
  • Take a small portion of the plant that has roots. A new stem can be used to start from scratch.
  • Separate the roots from their root ball carefully without damaging them.
  • Next, rinse the roots with warm water to get rid of dirt and soil.
  • Place the section of the plant in water. The water level should be at the roots and the leaves above it.
  • The glass jar should be kept in bright sunlight. Water should be changed every 5 to 7 days.
  • For better growth, you can also add a small amount of balanced liquid fertilizer to your garden once a month.
  • It will take several weeks for the roots to grow, but you will eventually have a bushy Anthurium Villenaorum.

In Soil

You might like traditional gardening methods, but you may prefer propagation in soil media.

  • Find a healthy stem that has at least one leaf. This stem can be separated from the main plant using pruning shears.
  • Fill a small, 3″ pot with a quick-draining mix.
  • Place the cut 1 inch below the soil. You must ensure that the leaf is upright.
  • Make sure to water the soil and place the potted plant in bright indirect sunlight.
  • The root development process can take between 4 and 6 weeks. After that, the cuttings will grow new leaves.


The plant flowers two to five times a year but is not particularly showy. The panicle-like, long white blooms are light green and pale blue.

This plant is beautiful because of its dark green leaves. These flowers are cut so my plant can concentrate its energy on new leaves.

You can encourage more flowers on your plant by placing them in an area that has good lighting before the blooming season.


This slow-growing Anthurium can grow from 47 inches to 70 inches (1.2 – 1.8 m) if it is given the right conditions. It can spread to a height of 59 inches (1,5 m).

READ ALSO:   Philodendron Painted Lady Care And Tips - Ultimate Guide 2022

This plant has a rare characteristic: the triangular white petioles with velvety or sub velvety leaves.

This Anthurium is a sophisticated houseplant because of its deep green leaves and white veins. The leaves are very soft and easy to touch.

The leaves can reach full size at 29 inches (75 cm) once the plant is fully grown. As the plant matures, the young leaves turn deep green.

Although there are many white-veined Anthuriums available, this one is unique. The leaves are thicker and have a rosette structure.

Common Problems with Anthurium Villenaorum

See the source image

Although Anthuriums are an excellent choice for container gardening they can be difficult to care for indoors. Below are the most common Anthurium Villenaorum problems.

Water Stress

root Rot is the most common problem for indoor Anthuriums. These plants’ roots are susceptible to rotting.

Overwatering is the most common mistake in Anthurium care. Overwatering can lead to serious health problems for your Anthurium.

Water stress can be caused by either under-or over-watering. Your Anthurium should never be left in a waterlogged area. However, it shouldn’t be allowed to dry completely.

If the plant has been drying out for too long, or if more than half the soil is dry, you can rehydrate it by soaking the root ball in the water.

In hot months, you should water your plants at least once per week.

Bacterial Wilt

The most obvious sign of bacterial wilt is chlorosis (also known as leaf yellowing). As bacteria spread through the plant’s vascular system via the veins, the foliage turns bronze/brown.

You will see a slimy brown discharge if you cut any Anthurium stem. As the infection worsens, your plant will begin to wilt.

Ralstonia bacteria are responsible for causing wilting. These bacteria thrive in humid environments such as greenhouses. To eliminate the virus, you can use these control and treatment methods:

  • For both infected and non-infected plants, it is important to follow a strict hygiene program.
  • Use a fungicide with phosphorous acid.
  • Infected tools can spread the disease; disinfect all gardening tools regularly.
  • Infected potting mixes can allow this bacterium to survive. To prevent the disease from spreading, it is best to get rid of infected soil and parts.
  • You must thoroughly disinfect all pots and trays containing infected plants.

Bacterial Blight

Your Anthurium may have v-shaped, watery lesions. These lesions are most common along the leaf margins.

Bacterial blight can be caused by Xanthomonas bacteria. The bacteria get into the leaves through the pores at the surface. Soon, infected leaves begin to yellow. Damaged leaf tissue can also allow bacteria to enter the plant system.

This bacterium prefers to grow in moist, warm soils with high humidity. Xanthomonas eat amino acids.

This bacteria can spread easily from one plant to the next. To avoid this, you should immediately isolate infected plants.

Your Anthurium will die if the bacterial blight goes untreated. Use the bottom watering method to water your plant.

You must dry the foliage. Bacteria can thrive in wet areas for many days if there is any water left.

Controlling humidity and moisture content is the best way to go. By keeping your plants apart, you can also improve air circulation and ventilation around your Anthurium.

After trimming infected Anthurium parts, disinfect all blades and shears. If you find that almost all the Anthurium leaves are infected, I recommend that you throw away the entire plant.

Use healthy stem cuttings to propagate your plants. The new plant will soon be infected if it is damaged or diseased. For propagation, always use a healthy cutting.

READ ALSO:   Dragon Scale Alocasia Care: How to Grow and Maintain a Beautiful Plants


Thin leaf Anthuriums can be susceptible to sucking pests rather than chewing them. To detect early signs of pest infestations in Anthurium plants, keep an eye on them. The leaves will be eaten by mites, mealybugs and thrips who slowly remove the plant juices.

Over time, the plant’s health can decline. You must be able to identify the symptoms of pest infections. Based on my experiences, I have compiled a list of common symptoms of pests.

  • Honeydew is a sticky substance that can be found in flowers and foliage. Honeydew can also be found around your plants.
  • Leaves that are distorted and mottled.
  • New leaves that are yellow and unhealthy
  • A combination of a limp plant and faded leaves.
  • There has been no new growth in the last few weeks.

After you have confirmed that pests are present, you can use strong water pressure to wash away the pests. The following materials can be used to clean your plant’s leaves:

  • Pyrethrin-based insecticide
  • Neem oil
  • Horticulture soap and oil

By keeping an eye on your plant and applying neem oil each week, you can prevent future infestations.

Tips for an Anthurium Villenaorum that isn’t happy

See the source image

  • This Anthurium requires sufficient light but does not appreciate direct sunlight.
  • To recover from transplant shock, you should feed the plant with a diluted vitamin solution right after it is planted.
  • This can cause root rot.
  • Take care to unpack your Anthurium carefully and examine for damage caused by transport.

Anthurium Villenaorum: Frequently Asked Questions

Is it possible for the Anthurium’s leaves to remain green in winter?

This variety is an evergreen one, so the leaves will stay bright green throughout the year.

How can I shield my Anthurium Villenaorum against the direct sunlight?

Sunburns can be caused by too much sun on your Anthurium. Protect it from the sun with shade cloths or sheer curtains next to a window.

What should I do if my Anthurium leaves have yellow spots and brown spots?

It is caused by a lack of light. Remove all unhealthy leaves and move your pot to a position that receives bright sunlight. You should also ensure that drainage holes are clear and water drains freely.

How can I prevent leggy growth from my Anthurium Villenaorum

To prevent leggy stems, ensure that your plant receives the same amount of sunlight as possible. To maintain the plant’s aesthetics, you should trim any leggy growth.

What are the most important conditions for Anthurium growth?

When caring for Anthurium plants you should not allow them to be in direct contact with cold drafts. You should maintain high levels both of brightness and humidity.

What can I do to encourage prolific growth?

To encourage more leaf growth, pinch the leaves or prune the plant in the spring.

Can I grow the Anthurium Villenaorum variety from my balcony?

The Anthurium can thrive outdoors in summer provided the temperature doesn’t drop below 60 degrees Fahrenheit (16° Celsius). It should not be exposed to the elements.

Conclusion On Anthurium Villenaorum Care

The velvetleaf Anthurium is a great way to decorate your patio or indoor garden with deep green leaves. This classic combination of dark green leaves and white veins is a great one. This plant can also be used to create a perfect environment for Orchids.

It can be hung in your living space in a basket, or grown in a terrarium. This compact grower is adaptable to any environment that has adequate light and humidity.

It is rare and still very new to find this unusual Anthurium. This Anthurium is easy to care for and can be used to decorate your home or purify the air. Keep this plant out of reach of pets, as it contains toxic parts.

Looking for other articles on our plant guides, then check this out

Leave a Reply

Back to top button