Philodendron Plant

Philodendron Billietiae Care (10+ Proven Step By Step Ultimate Guides)

There’s no unique tale or background to this vine-climber Philodendron billietiae. It doesn’t have to be. This Philodendron is unique in its own right.

This intriguing plant requires plenty of indirect light and well-drained soil. It is best to wait for just a few inches of soil to dry out before watering this plant.

Care for the Philodendron billietiae is easy.

The plant is a result in countries such as Brazil, Costa Rica, and French Guyana.

The massive, glossy, arrow-shaped heart-shaped leaves are a statement on their own. Don’t forget the beautifully long, red stems.

Therefore, I’m going to show you all you should be aware of when it comes to caring for this Philodendron.

This article will address your questions.

Philodendron billietiae Care

To take care of the Philodendron billetiae make sure that you have well-draining soil with perlite, potting soil orchid bark charcoal and bright indirect lighting. The two top” of the soil has dried (5cm) and maintains temperatures of 65-80 degrees F (18-27degC). The humidity of the air should be at or above 50 per cent. Fertilize with a slow-release fertilizer every 2 to 3 months.

Philodendron billietiae Care Guide

Soil Mixture

The most suitable soil for the Philodendron billietiae plant is squishy aroid soil made up of perlite, potting soil peat moss, orchid charcoal, and bark.

As with most Philodendron plants the Philodendron billietiae requires well-drained soil to flourish. Organic materials are the most suitable for this plant.

well-drained soil is a baffling name. It is like the soil is designed to drain water through it.

This is true to a certain extent. It allows any excess water to go through. It also holds enough moisture to nourish your plant.

The excess moisture blocks oxygen from circulating throughout the soil. Oxygen isn’t able to reach the root of your plant and other vital areas.

The most common problem you’ll encounter when you’re exposed to too many humid conditions is the development of fungi. There are numerous types of kinds of fungi.

Certain types of fungi are not harmful. However, other kinds of fungi may destroy your Philodendron billietiae.

Another problem that is a result of the excess watering of the plant can be root rot. Since oxygen cannot get to the roots, the roots begin to rot.

If you’re lucky enough to detect root rot in the early stages you could keep your Philodendron. However, most of the time the rot is spread throughout all roots.

Then, the conditions will eventually kill those who have Philodendron billietiae.

Watering your plant too little can be just as harmful as overwatering it. This is the reason why plants require well-drained soil.

If you’re not sure about the quality of your soil do not be scared to test it before you plant your Philodendron billietiae.

Another fantastic recipe for soil that is well-drained may include:

  • compost
  • perlite
  • soybean meal
  • sphagnum peat moss

It should contain equal portions of perlite, compost and sphagnum peat moss. There is just a small amount of soybean meal for the mix.

Light Requirements

Your plant must receive ample indirect light.

If any of the plants grow in the tropical regions, it’s receiving all the sunshine they can require. However, it’s also shaded by trees and higher-growing plants around.

If you expose your leaves of the Philodendron to direct light for too long it will cause them to be burned. The leaves will form nasty scorch marks that look like scorches.

Your plant will still require ample sunlight to grow the huge leaves it is famous for.

It’s not difficult to obtain both direct and bright sunlight. All you have to do is put the Philodendron in the east or north-facing windows.

Under artificial light, position your Philodendron billietiae on the side by a couple of inches. This ensures that the light doesn’t strike it directly.

Be cautious not to position your plant far from the light source. The further from the lights the plant is from the lights, the less light it’s getting.

It is necessary to rotate your plant every couple of days when using artificial lighting.

Philodendron Billietiae Watering

The Philodendron billietiae plants require well-drained (not overly saturated) soil to flourish.

A Philodendron that has soil that is saturated may encounter a variety of issues. Certain problems can cause the plant to die.

Naturally, root decay (or the wet feet) is one of the serious issues that can arise when you over-water your plants.

If you spot root rot in time it is possible to help your plant survive.

The problem is that root rot may not have obvious signs on the soil. Also, the symptoms that your plant might show can be misinterpreted as different plant diseases.

Before watering your billietiae of Philodendron, look at the soil to determine how the soil is moist or dry.

To test the soil of your plant the only thing you need to do is insert your finger into the soil. Place your finger on your knuckle, or around 2 inches deep.

If your plant’s soil has dried up to the point of your finger It’s time to water your plants.

Don’t water it if those tiny inches remain wet. This could lead to over-watering and we’re all aware of what that can lead to.


This species performs best at temperatures that range between 65F (18C) to 80F (27C).

In the evening, temperatures will be in the range of 55F (13C) and 65F (18C).

READ ALSO:   Philodendron Ornatum Care And Secret Tips - Ultimate Guide

Make sure to keep this Philodendron far from freezing temperatures. It isn’t able to withstand temperatures that are below 55F (13C) or any frost.

Philodendron Billietiae Humidity

Tropical Philodendron billietiae requires a high level of humidity that is above 50%. It comes from an area of warm weather that transports humidity in the air.

If your plant is going to experience high humidity, you must create that environment for yourself. Don’t stress. It’s not difficult to make high humidity inside your home.

The most effective method of creating humidity is using the Pebble Tray method. It’s simple to set up and easy to track.

The first thing be doing is fill up a tray with pebbles. Then, you add water to the tray. It should hold plenty of water however it should not completely be able to completely cover the pebbles.

All you need to do is put your plant pot on edge of your pebble tray.

The pebbles’ water tray will evaporate slowly. As the water evaporates it causes moisture to rise in the air.

The Philodendron billietiae plant can take in all that water.

Pebble tray methods aren’t the only option. You could also fill a spray bottle up with water. Spray your leaves.

It is important to be cautious not to over-saturate or soak the leaves. This could cause an infection with fungus. The leaves may be covered with the odd lesion.

It’s also difficult to determine what amount of humidity you’re creating by using this method.

You must also establish the time you’ll need to spray your plant. In the absence of this, it will be difficult to track the times when your plant needs water.

The other option is to make use of the humidifier. This lets you control the amount of humidity generated.


An organic fertilizer that releases slowly is the ideal option for fertilizing the Philodendron billietiae plants.

Slow-release fertilizers release fertilizer over months at a time.

The use of this fertilizer makes it possible for you not to fertilize your plants constantly. It’s only necessary to fertilize once every two or three months.

Check that the fertilizer you are using contains all of the macro-nutrients essential to life. It includes nitrogen, phosphorous and potassium.

The soil you use for your Philodendron billietiae must be moist before fertilizing it. When the soil’s moisture is low, fertilizer can cause the plant’s roots to be burned.

Philodendron Billietiae Propagation

Propagating a Philodendron plant is the same as propagating many other Philodendron species.

You can propagate either with stem cuttings or by the process of air layering.

Read on for more details about the best ways to grow this species.


The Philodendron billietiae can reach up to three feet tall. The plant can grow to around eight inches in size.

The leaves can grow three between three and five feet. In terms of width, they range between 7 to 10 inches.


If you are dealing with the Philodendron billietiae, it is necessary to pot it every two years or so.

It takes on average two years for the Philodendron’s roots and roots to grow beyond the present pot that is being used.

If roots are compressed due to a tiny pot, they will become stressed. Roots that are stressed are more susceptible to various ailments and diseases.

Be sure to only pot your Philodendron in the pot that’s just smaller than the one you originally.

Philodendron billietiae Propagation Steps

It isn’t important how you’ve spent time caring for your houseplants. The propagation of a Philodendron billietiae plant is straightforward with the stem cutting method.

There are two ways to propagate this philodendron. We’ll guide you through both methods.

Using Stem Cuttings

  1. The first step is getting your Philodendron billietiae cut. There are a few aspects to think about before purchasing this cutting. You need the most effective stem cutting to have greater chances of rooting. The best cut is between two and four inches long. Cut immediately following a leaf node and it must have at least two leaves connected. You’ll need an unsterilized pair of pruning shears. You can make use of isopropyl alcohol to clean the shears. When you have your pruning shears in place then you can go ahead and begin cutting your stem.
  2. It’s now time to treat the cutting of the stem. Curing stems will allow the cutting end to become calloused over. The calloused portion is going to be the last part of the soil once planting it. To treat the wound allow it to rest for a minimum of seven days in a cool, warm place.
  3. There is plenty of time to prepare everything. Make sure you have the pot and soil prepared to be planted. The pot must have drainage holes. The holes permit excess water to drain straight through. Because this plant is a climber, you might like to have a mossy pole in place. You just need to place it on the earth. However, you don’t need to plant the mossy pole until. It takes time for a plant of the Philodendron billietiae to establish.
  4. After the week has ended and you are ready to start planting your cutting. Begin by sticking your finger just a few inches into the soil. This creates an opening that will fit the cutting on the stem. Then, stick the cutting into the soil, and then wrap the soil around it.
  5. There are times when the stem cutting will not be able to stand on its own. If you encounter this problem, you can tie your stem cut to straws. This is a tried and tested method.
  6. All you have to do is allow the Philodendron plant to develop. As it begins to grow out, you’ll need to begin making it wrap around your pole that is mossy. The stem should be watered when the soil is beginning to dry, and ensure that it receives bright indirect sunlight.
READ ALSO:   Philodendron McDowell Care And Secrest Tips - Ultimate Guide

Using Air Layering

  1. You must turn off the billietiae plant of Philodendron for the process of air layering. It sounds a lot worse than it is. To cut off your plant, you require a knife that has been sterilized. You can use alcohol such as isopropyl to clean the knife. When the knife is clean and ready to use, proceed and make a cut on the plant. The cut should be approximately two inches in length, and two inches in depth.
  2. The wound needs to remain open to be able to take root. To keep the wound open put a toothpick between the bottom and top of the wound. Make sure that it’s placed so it doesn’t open the wound.
  3. Now is the time to prepare some Sphagnum sphagnum peat-moss prepared. Peat moss must be damp so that it will stay on the plant. Spread the peat moss onto the wound of the plant. Be sure to completely cover the wound. It is possible to use an endocrine compound for rooting. These hormones may accelerate the growth of roots.
  4. This step isn’t necessary. If the peat moss from sphagnum is stuck to the wound you can move on to the next step. However, if it doesn’t adhere to your wound try wrapping an elastic band around the wound and stem. This can help to keep the majority of the peat moss away from the plant.
  5. The next step is to grab the plastic wrap and place it over the cut as well as the stem. Make sure that the wrap is tight enough to secure the peat-moss close to your wound. The wrap must be flexible enough that the peat moss breathes. You can make use of duct tape to secure the plastic wrap onto the stem.
  6. It’s time to get your plant pot set. It will take a few weeks for the peat-moss wound to establish roots. You could also plan for once the roots have grown to be planted. The pot in which you plant must have drainage holes that allow water to drain out. Make sure that you’re using well-draining soil. It’s possible to make the mossy pole more attractive by putting it in the soil. It’s not a requirement because it takes time for a plant called Philodendron billietiae to establish.
  7. It takes about 1 month for roots to begin growing. It takes another few months for the wound to develop enough to allow roots to be planted. When the roots measure around three inches long and are ready to be planted, they’re ready. Before you can plant them first, you need to remove the wound from the stem. It is necessary to use a sterilized knife for this job. You’ll need to cut just a few inches higher than the peat-moss, and several inches lower than the peat moss.
  8. Take off the plastic wrap covering the peat moss and wound. Take care when making this process so that you don’t damage the roots. They’re fragile.
  9. Now it is time to start planting the roots. The roots should be completely beneath the soil. While you are planting take care with the roots.
  10. It will take some time for your billietiae Philodendron billietiae to develop, but it’s well worth the wait. If you want to see the Philodendron grow, you must maintain it as a mature plant. It is essential to water it regularly and ensure that it is exposed to plenty of indirect light.

The Common Issues With the Billietiae Philodendron

Another benefit of the Philodendron billietiae plant is that it’s not a pest magnet. You don’t have to be checking your plant each day for signs of insects taking over.

It eases your shoulders when it comes to Philodendron’s health.

It’s not impossible to get the pest infestation you’ve been looking for within your Philodendron.

If you bring a plant that is infested to your house, there’s a good chance that some pests will be wandering around. They’ll find ways to get into your Philodendron billietiae plants.

There are only two pests of plants which are averse to tropical plants. The first pest of the plant is the Aphid.

Aphids are soft, pear-shaped bodies with antennas that are long. They’re so tiny that it’s difficult to discern them without a telescope.

The pests of these plants feed on the sap within the plant’s billietiae or Philodendron. They can penetrate the exterior of the plant to access the essential parts.

The sap is made up of and contains two major kinds of cells.

One kind of cell is responsible for carrying the water your plant absorbs from the soil. Another kind of cell transports the nutrients that are also absorbed by the soil.

Your plant depends on water and nutrients for its survival. They’re essential for the process of photosynthesis.

A tiny aphid infestation shouldn’t cause much harm to your billietiae Philodendron.

A large aphid problem is a different story. Mouths are sucking the sap from your plants.

If the bugs are eating everything your plant needs There will be issues. In the worst-case scenario, it could lead to the loss of the plant.

The other plant that you could encounter will be mealybugs. Mealybugs are unique insects.

The first sign of an infestation of mealybugs by the appearance of cotton fluff appearing on the plant.

Mealybugs are covered with an emulsion of cotton. This is the reason you’ll notice that there is a lot of cotton fluff.

READ ALSO:   Philodendron Gabby Care And Secret Tips - Ultimate Guide

The cotton-like substance is an armour type that protects the bug from harm outside.

Similar to aphids they feed on the plant’s sap.

They can penetrate the exterior of the plant by using straw-like mouths. The mouths also allow them to expel the sap.

The mealybugs eat everything plants require to thrive and survive.

The pests of these plants don’t need the ability to become difficult. One option is to apply Neem oil.

Neem oil is a natural product. It’s not believed to harm plants, but you’ll need to try it before use.

If you’re concerned about the power of the neem oil don’t be afraid of diluting it by adding water.

For neem oil use then make sure you fill your spray bottle full of the oil. You then spray down the Philodendron billietiae plants.

It is dense that it can kill insects. The only thing you have to do is wash the plant clean to eliminate dead insects.

It is possible to repeat this procedure twice every week for several weeks. It’s all dependent on the severity of the infestation of your plant.

Check Out More Related Philodendron Plant:

Tips for an unhappy Phodendron billietiae

You’d like to keep your Philodendron billietiae plants healthy. You’d like a healthy blooming plant.

It’s not always easy to keep every Philodendron satisfied. It happens, and so do errors.

Here are some suggestions for a discontented Philodendron billietiae Plant.

Your Philodendron billietiae Has Droopy White Leaves

A Philodendron billietiae with droopy, white leaves is experiencing a cold shock.

As we mentioned earlier that this Philodendron doesn’t stand up to temperatures that are below freezing. If it’s exposed to these kinds of temperatures, there are likely to have consequences.

If your Philodendron has been experiencing cold shock, it could be placed too near to air conditioning. Maybe you’ve left a door left open on a cold morning.

First, ensure that your Philodendron is located in a warm zone. It should be moved away from your air conditioner, or any open windows.

The only thing you need to do is cut off dead leaves that have suffered cold damage. This will allow new, healthy leaves to grow in their proper place.

The Philodendron billietiae’s leaves have an av-Shaped stain

Stainings of Philodendron billietiae in their leaf tips show magnesium deficiencies.

As per the Florida Department of Agriculture and Consumer Services, the staining is just the beginning. The stains are likely to change into necrosis in the form of brown.

To correct the magnesium deficiencies spray your Philodendron down using a mixture of Epsom salts with water. Epsom salts are rich in magnesium.

However, this is only an interim solution. You must purchase fertilizers that have the highest concentration of magnesium.

Other Varieties of Philodendrons

plant, leaves, philodendron rugosum
Photo by ignartonosbg on Pixabay

There are more than 400 species of Philodendrons available to select from. You can design your tropical paradise inside your backyard.

Below are some great Philodendrons you can match with your billietiae from Philodendron.

Philodendron micans

The Philodendron micans has velvety leaves. The leaves are velvety and dark green, but they conceal deep purple as well.

Philodendron grazielae

This adorable plant has tiny heart-shaped leaves. It’s smaller than most Philodendrons.

Philodendron brandtianum

This Philodendron plant is known for its stunning leaves. It’s as if someone grabbed the paintbrush with white paint and worked it on the leaves. The white is the perfect contrast to the green.

Philodendron Prince of Orange

We love this Philodendron variety. It’s a type of Philodendron that grows in shrubs with beautiful leaves. The leaves are orange on top, and green beneath.

Philodendron hederaceum

The Philodendron hederaceum plant another Philodendron with heart-shaped leaves. It grows larger in comparison to the Philodendron grazielae.

Commonly asked questions about The Philodendron Billietiae

Am I need to utilize a mossy pole for my Philodendron billietiae?

There’s no need to utilize a mossy pole to support your billietiae of Philodendron. Bamboo stakes are an excellent alternative. It is also possible to use an edging basket instead of a planter pot.

Do Philodendron billietiae plants poisonous?

Yes, your billietiae of Philodendron is poisonous. Every Philodendron plants are poisonous. The reason for this is that this plant’s leaves are covered with calcium Oxalate crystals. Make sure your pets are kept out of it.

What is the reason why those leaves that are on my billietiae of Philodendron are curling towards the tip?

If the tips of the leaves on your Philodendron billietiae billietiae are curving, you’re probably over-fertilizing. Switch the soil to the plant and begin with a lower amount of fertilizer.

Reverted Philodendron billietiae variegata. It is only the leaf with the longest age that exhibits the variegation


It is believed that the Billietiae Philodendron plant can reach an acceptable height. The leaves can also grow to a good length. Make sure you have enough room to take care of one of these beautiful tropical plants.

Looking for other articles on our plant guides, then check this out

Leave a Reply

Back to top button