Philodendron Plant

Philodendron Bloody Mary Care And Tips – Ultimate Guide

Philodendron Bloody Mary Care: Bloody Mary Philodendrons make a great choice for houseplants. Their stunning foliage is what makes them so popular. The leaves are a mix of red and burgundy.

Although it can survive in many different environments, it thrives best in bright indirect sunlight. It can survive in low light, however.

The soil should be kept moist throughout spring and summer. However, in winter the soil must be allowed to dry between watering sessions.

The stems of this plant are reddish and the growth is drooping. Bloody Mary Philodendrons can be used to make hanging baskets or shelf pots. It is toxic so it should not be used near children and pets.

Georg Markgraf reported that the earliest reference to Philodendrons dates back to the 1600s.

However, this plant was discovered scientifically by Charles Plumier in the 16 century. Since then, many other species have been discovered.

It has some interesting characteristics, such as the burgundy-coloured leaves that are filled with red colour fluid. This is why Bloody Mary Philodendron is named after the plant.

Although all Philodendrons have their unique characteristics, they are all known for their stunning appearances and remarkable characteristics.

Although basic care is important for all plants, it’s vital to understand that Bloody Mary Philodendrons can be extremely durable.

Basic Plant Care for Philodendron Bloody Mary

See the source image


You must consider the quality of your soil when planting your plants. You can grow Bloody Mary Philodendrons in any soil, but you must make sure it is well-drained. Good drainage is important to prevent future problems such as fungus and rotting.

The pH of the soil should be between 5.6 and 7.5. This is the best pH for this plant. Bloody Mary Philodendrons can grow in 100% or sphagnum moss. Other options include mixtures that don’t contain soil. You can find soilless mixes here:

  • Peat-vermiculite
  • Peat-perlite

Any high-quality, fast-draining pot mix is a good option.

Philodendron Bloody Mary Watering

You must have read about the soil that Bloody Mary Philodendrons like. This means they don’t need much water. The soil should be kept moist during the summer.

Winters are when you should reduce the amount of watering. The soil should be at its highest point. Since this decreases the chance of fungus, I prefer to water the soil directly rather than the leaves.

This plant can still grow despite its tendency to droop downwards. However, it will still droop further if it is given more water. If you don’t follow watering guidelines, droopy leaves and rotting roots can become a problem.

Philodendron Bloody Mary Light Requirements

indirect sunshine is what Bloody Mary Philodendron likes. This is the best light for them to thrive. They can survive in partial or low light. It is best to avoid putting the plant in direct sunlight, as this can cause it to burn.

Plants that receive too much sun will experience browning. The same goes for Bloody Mary Philodendron. If you notice a “leggy stem”, it means that your plant isn’t getting enough sunlight.

Bloody Mary Philodendrons can survive in all kinds of conditions.


Bloody Mary Philodendrons do not grow in winter. Experts suggest that they be moved to warm areas during winter. Keep them at 60 to 75 degrees Fahrenheit (16 degC- 24degC) for best conditions.

The temperature should be kept between 60 and 75 degrees Fahrenheit (16 degC- 24degC), otherwise, the plant will experience poor growth and other health issues.

Philodendron Bloody Mary Humidity

Bloody Mary Philodendrons are more resistant to moisture than other Philodendrons, which can thrive in the humid environment of rain forests.

You can increase the humidity if your plants’ leaves turn yellow or become lumpy. Bloody Mary Philodendrons thrive in humid environments, so it is important to increase the humidity on hot and dry days.

You can increase humidity by using a humidifier, misting the plants or keeping a pebble water tray underneath the pot.

Philodendron Bloody Mary Fertilizer

Bloody Mary Philodendrons grow quickly and are highly sought-after for their high-quality food. Any fertilizer is acceptable for domestic plants. You should apply the fertilizer every month in spring and summer.

This amount should be decreased to once every two months during winter. Slow-release fertilizers are also recommended as they slowly release nutrients.


If you are unsure when to repot your plant, you can know that the roots should have formed a tight ball and become compacted. Then, you should pot your plant in a larger pot, 2 to 3 inches bigger than the one you had previously.

This should be done before the plant begins to grow new leaves. It is best to do it during winter or spring as plant growth is slower.

Related Articles

Here are the five steps to take to care of a snake plant

Philodendron Black Cardinal Care

Philodendron Burle Marx Care

How To Fix Root Rot Fiddle Leaf Fig Fast

Philodendron Goeldii Care

Philodendron Red Moon Care


Pruning a plant is not an easy task. If you don’t know when to prune your plant, wait. Pruning Bloody Mary Philodendrons is best avoided unless necessary.

Remember that good pruning does not affect the plant’s overall appearance.

This means that once you are done pruning your plants, it should not be obvious that any damage was done. If the plant takes up too much space, cutting it is not a good idea.

To remove yellow leaves and to trim excess length, you can trim your plant. Make sure to clean your tools before you start trimming your plant.

This simple step will help you extend the life of your plants by preventing the spread and development of diseases that could affect your plant’s growth.

To sterilize your pruning tools, first, remove any mud or debris. Then, dip them in household bleach and water.

Reduce the bleach to 9 parts bleach and 1 part water. To sterilize the tools further, rinse them with water. Bleach is corrosive.

You can also use rubbing alcohol to clean the tools, which is less corrosive.

Always cut or pinch the leaves above the leaf nodes when you trim a plant. The point at which a new stem or leaf grows is called the leaf node.

You will end up with stubs if you don’t cut beyond the leaf nodes. This will affect the aesthetics of your plant.


It is easy to propagate the Bloody Mary Philodendrons. Cut the stem tips during the spring and early summer seasons. You can easily get the root in by simply placing the stem in water or moistened soil.

These are the most popular forms of propagation for Bloody Mary Philodendrons.

  • Seeds
  • Leaf-cutting
  • Stem cutting
  • Mound layering (stooling)
  • Air layering

These forms of propagation require some knowledge. Layering is best for experienced growers. Seeds are slow to germinate. Stem cutting is the easiest method of propagation, and it is also the most popular. These steps are described below.

  • The stem should be removed from a mature and healthy plant. Use a knife to cut the stem about five to six inches.
  • To get the nodes, take at least three leaves.
  • Prepare water or moist soil, and then dip the leafless end of the stem in either medium. The soil should reach at least three inches below the stem.
  • To have faster and better growth, dip the end in rooting hormone. However, this is not a requirement.
  • Your cutting should be kept in warm temperatures and plenty of sunlight. The sun shouldn’t directly touch the cutting, as this could cause damage to the roots.
  • After root growth is visible in a few weeks you can transplant the plant to a suitable pot. Follow the care instructions for your plant as directed.


Although this plant does not produce flowers, it is well-known for its colourful stems and beautiful foliage. Newly cultivated leaves will turn a bright red, but the plants mature and the leaves turn green. Due to its strong stems, there is always plenty of this plant’s leaves.


The plant can reach heights of between 10 and 12 feet if it is given the best conditions for growth. It can also grow up to 9 inches in width. The plant’s growth depends on its growing capacity and your ability to care for it.

How much space you allow your plant to grow can also have a major impact on its height. Their growth will slow if they are kept in a crowded area.

Bloody Mary Philodendrons have a climbing growth habit, and, like other Philodendrons have a rapid growth rate.

A Bloody Mary Philodendron prefers to grow next to a host plant if it is wild. Indoors, however, the plant will climb on any support such as plant support.

Mature leaves can grow up to 2 to 4 inches in length and 1 to 2 inches in width. The stems are reddish and the leaves are pointy, long, and smooth.

They can grow in any direction and mature in a longer length. This causes them to droop.

Common Problems with Bloody Mary Philodendron

See the source image


Gardeners are familiar with mealybugs. These pests are a problem for many gardeners. They have a reputation for infesting greenhouses. They are usually found in warm areas and have a soft, rounded body.

When they are on leave, they have a white appearance and use their mouths and tongues to extract the sap from the leaves. This results in yellow leaves and curling.

Fungal diseases can also indirectly be caused by the bug. Once it has finished feeding, the honeydew is left behind. Honeydew, a sticky substance, is the ideal spot for fungal growth.

You can control the spread of mealybug.

  • You should remove any growth of mealybugs from the plant.
  • You can treat certain areas with a cotton bud dipped in at minimum 70% alcohol.
  • Neem oil also has anti-repellant qualities.
  • Reduce overwatering.
  • Reduce over-fertilization.


Another pest to be aware of is the aphid. Aphids are a pest that can be found in newly-grown plants.

Aphids can cause yellowing, curling and wilting of leaves. Aphids and mealybugs share one common trait. It is the sticky honeydew that they leave on plants. This leads to fungal disease and growth of sooty mould, and also attracts ants.

You will need to remove the area where the aphids are present. Over-fertilizing the plant can cause aphids to grow faster, as they prefer nitrogen-rich soil. You should use a slow-releasing fertilizer.

Pseudomonas Leaf Spot

Even philodendrons can’t resist Pseudomonas Lead Spot. There are several symptoms such as:

  • Yellow leaves
  • Lesions
  • Holes
  • Growth slowing down or stunted

This disease can be transmitted to plants if they are not receiving the proper care. This problem can be solved easily. You just need to provide the best conditions for the plant’s growth.

When pruning or grooming your plant, be sure to observe it. You should be aware of any unusual growth patterns or discolouration.

Tips for Growing Bloody Mary Philodendron

These tips will help you grow your plants.

  • Place your plant in a less crowded area.
  • Divide the plant correctly.
  • Use a well-drained soil and a suitable soil mixture.
  • You can ensure that your potted plants are in the best possible conditions by giving them water and fertilizing them as necessary.

Frequently Asked Questions Bloody Mary Philodendrons

See the source image

Why do my Bloody Mary Philodendrons’ tips turn brown?

Because the leaves can turn brown if they are not getting enough moisture, your plant will need more. Bloody Mary Philodendrons should be kept in a humid environment and the soil should remain moist. Potted plants are more susceptible to drying out than ground plants, so make sure you provide enough water and humid conditions.

How much light is needed to grow Bloody Mary Philodendrons in full sunlight?

Even in low light conditions, philodendrons can survive. Place your plant next to a window so that the sun doesn’t directly hit the leaves.

Do I need mist my Bloody Mary Philodendrons?

Bloody Mary Philodendrons can be considered tropical plants. They require higher humidity levels to grow well. Although the plant can withstand low humidity, it is not able to thrive. Therefore, mist your plant often.

Are our Bloody Mary Philodendrons fond of being root bound?

The Bloody Mary Philodendrons don’t like being root-bound. Although they can tolerate it better than most other house plants, it is not the same thing as liking it. Regularly repot your plant to keep it healthy.

Why do Bloody Mary Philodendron’s leaves curl?

Cold and dry conditions can cause leaves to curl. Philodendrons, tropical plants, prefer humid conditions. You can increase humidity by misting the plant.

Conclusion On Philodendron Bloody Mary Care

Once it matures, your Bloody Mary Philodendron is sure to be the focal point of your room. The mature Bloody Mary Philodendron is a stunning climber and has an aesthetic, unlike any other plant.

The plant is stunning when it sits in a corner, so it can be the focal point of attention. Its stunning foliage is worthy of recognition. Choose a spot where it can shine brightly.

The leaves will begin to drop as the plant ages. This is beautiful when the plant is kept on a shelf, or hanging in pots/baskets. It is poisonous and can cause harm if ingested so keep it away from children and animals.

Looking for other articles on our plant guides, then check this out

Why is My Zebra Plant Leaves Turning Brown?

cobra fern plant care guide

Pothos Plant Care

Why is my asparagus fern yellowing?

Why Are My Caladium Leaves Curling?

READ ALSO:   Philodendron Melinonii Care And Tips (2023 Ultimate Guide)

Leave a Reply

Back to top button