Philodendron Sodiroi Care: Philodendron Sodiroi often known as silver leaf Philodendron and Sodiroi Ornatum Silver, is a beautiful Philodendron plant that belongs to the Araceae Genus.
Let me inform you in advance. They are extremely difficult to come by and are extremely rare.
Philodendron Sodiroi Care isn’t difficult. It is more difficult to locate the plant than to keep it in good health.
I’ve been collecting Aroids, and in particular Philodendron plants, for a few years and I am a bit confused as I’ve only witnessed Philodendron Sodiroi offered three times.
The care of plants of Philodendron Sodiroi isn’t a huge departure in comparison to similar Philodendron plants. They are quite easy to maintain
Philodendron sodiroi is a fan of well-drained pots that have a light. They thrive in temperatures that range from 55deg to 80degF (13deg 27degC – 13deg) and prefer high humidity of 60 60%. It is recommended to water them once per week and fertilize them every two weeks with an oil or a slow-release fertilizer.
It features heart-shaped leaf blades, which are silvery on the adaxial sides. The adaxial side is the upper portion that the leaf is located on.
The leaves themselves are glossy and glossy. The designs in silver make the leaves distinct. Furthermore, each leaf appears the same.
The leaf’s lower side is known as the abaxial part. The side that is called the leaf of Philodendron sodiroi is light green.
The midrib is bright green, and the leaf blades feature veins that are lateral to one another.
Cataphylls are bicolorous. The combination of red and green is the best to describe it.
It tends to climb and is a fan of any support pole or any other support.
The stems themselves are bright green, and the Sodiroi is believed to spread easily.
The petioles, which is the part that joins the leaves to the stem which is green and has an orange-red hue. The petioles tend to be short.
Red air roots are developing at the point where they are located. A high level of humidity allows these roots to expand and join with other trees and objects however dry conditions could cause the root systems to become dry.
The roots system itself becomes set up fairly quickly.
The Philodendron sodiroi is found in South America in countries such as Trinidad and Tobago, French Guyana, Guyana, Surinam and also from Venezuela from Brazi as per the University of Connecticut.
Philodendron Sodiroi Care
Philodendron Sodiroi Soil Mixture
The most suitable soil for a Philodendron sodiroi plant is an airy mix of potting soil that’s well-draining.
This is the most common gospel that is proclaimed on almost any Philodendron Monstera or Anthurium plant.
However, a mixture between peat and humus is known as the ideal combination for these amazing climbers.
I keep my plant inside Lechuza Pon. It is a volcanic substrate that is enriched with nutrients.
It is a semi-hydroponic method to grow these plants.
So far, the Philodendron sodiroi is doing very well and has been growing new leaves regularly.
It’s gorgeous since the time the truck arrived at my home and took off immediately.
If I weren’t growing the plant within Lechuza Pon, I’d just make an aroid mix with Perlite orchid bark Peat moss and a bit of Charcoal.
A great option for Peat Moss would be Coco coir. Coco coir is much more easily accessible than peat moss, and I would guess that it’s also more beneficial for the environment.
The ideal soil pH is between 4.5 to 6.
Philodendron Sodiroi Care Light
Philodendron sodiroi prefers filtered light.
Around 70-85 per cent of the sun’s energy is ideal. I place my philodendron sodiroi in a window facing east.
The plant must be kept in the bright indirect light or filter light.
The direct sun’s rays for a long time will cause burning off on the leaf of this plant.
If the plants are placed in extremely intense sunshine for long enough, they could even degrade and eventually die.
I believe that they require some extra illumination compared to other Philodendrons as I am unable to imagine that the silvery patches are advantageous when it comes to conducting photosynthesis.
Alongside the window facing east, I also add the light source for all my Aroids. It is located at the top of the plant and stays on all the time.
I don’t think my houseplants need in the Spring or Summer months however I can see them performing better during cold winter and autumn days.
Since I began growing with grow light, I can’t notice a difference in the growth and not-growing.
Therefore, it’s worth it for me.
Philodendron Sodiroi Watering
Drink water about once per week as a practice.
However, the amount of water you drink is dependent on environmental conditions.
If you live in a very dry region, you might require watering every few days or even every day.
If you live in a tropical zone in which the humidity is very high, you might have to drink less water.
The most effective way to determine whether your plant requires water is to put your index finger in the soil.
A common concern is, how far to go to get your finger in the earth?
In general one inch or so is usually enough. If the soil is extremely wet, you shouldn’t be able to water.
If the topsoil is dry, then you’re well and need to water your plants.
I can water my Philodendron every week at a time in the times when the soil is slightly damp.
I am referring to the one that’s not included in Lechuza Pon, but with the self-watering containers, I would probably only water every two weeks.
Do not wait until the soil is dry, as some guidelines for care suggest. Philodendron plants generally prefer mildly damp soil.
Particularly when compared to Monstera plants, which are more prone to root rot, which is caused by extremely humid soil.
If the soil is very dry, it could act as a blanket, which is known as”The blanket effect.
The blanket effect implies that even if you do water but the water will not pass through the soil because it’s been dried for too long.
Do not let your plant get dry completely. Allow it to remain slightly wet, but never soggy.
The most suitable temperature range for Philodendron sodiroi is 55deg-80degF (13deg 27degC to 13deg). Philodendron Sodiroi can be cultivated outdoors in USDA zones of hardiness ranging from 9b and 11.
It’s interesting to note that a lot of Philodendron plants are cold-growing.
Being a cold grower implies that they can grow more in colder temperatures than extremely high temperatures, ranging from 80 degrees Fahrenheit or higher.
As with other Philodendron plant species, The philodendron sodiroi prefers moist air.
The higher the humidity, the better. Make sure that the humidity is not lower than 60% all the time as much as you can.
I tend to my Sodirois at around 80% and they love it. Being 40% is a bit difficult, however, at any point above that, your plants will do okay.
However, if you want your Philodendron sodiroi plant to flourish ensure that you allow greater humidity levels.
An effective method to maintain an appropriate level of humidity is to put a pebble tray beneath the pot in which you plant.
This could boost the amount of moisture by a few per cent.
It is unlikely to see figures like over 80. To achieve this, you’ll need an enclosed container in which humidity is held.
A different method could be to spray your plants all day.
However, you must make sure whether the leaves aren’t getting wet constantly. It is important to have good airflow so that leaves do not stay in a constant state of wetness for long.
In other cases, the fungus may begin developing on the leaves. This can also be the case in extremely humid enclosures that have low airflow.
Philodendron Sodiroi Fertilizer
Use a fertilizer with a slow-release as well as a fertilizer that is liquid 2 times per week.
Fertilize during Spring and Summer and cut back on fertilization in autumn and winter to every 3-4 weeks.
Philodendron Sodiroi Propagation
Philodendron sodiroi is propagated best with stem cuttings.
Alternate methods include seeds. However, if seeds aren’t easy to find and you know that they are not easily accessible online then the best option is to still propagate this plant.
Another method is micropropagation Philodendron Sodiroi, but the majority of us won’t have the expertise nor the lab equipment needed to replicate plants by micropropagation.
I would classify the growth rate as being average to rapid-growing. The company claims that they expand 1-3 feet every growing season.
A new leaf is every month on my Philodendron sodiroi plant.
These plants are expected to increase in size quite quickly, and I’m eagerly awaiting this to occur.
For me, slow-growing plants are plants that develop new leaves every few months.
It’s me looking up with an eye on Anthurium Veitchii as well as Anthurium Warocqueanum.
Philodendron Sodiroi Repotting
When selecting a new pot the most important aspect is to be sure there are drainage channels.
If you don’t have proper drainage your soil can become soft and there is the possibility you’re indoor plants suffer from root mould.
Insufficient drainage is something you should avoid at all costs.
Thus, you should invest in a high-quality pot that has drainage holes.
The best option is terracotta pots. However, generally, you can use any pot so long that it has drainage holes through which the excess water drains out from the pot.
Philodendron sodiroi is a good choice for round pots.
Propagation Philodendron Sodiroi Step By Step
Let’s discuss the best way to propagate Philodendron sodiroi in the best manner possible.
As I’ve already said stem cuttings are the best way to take them.
To reproduce a Philodendron, you must use an unclean knife or sharp scissors (better to employ cutting shears for pruning instead) then cut through the stem of the plant just below the node.
The node is where air roots usually develop and appears knobby.
It is essential to ensure is that the cutting you are cutting has at minimum one note since plants that are philodendron cannot reproduce without notes.
Leaves are wonderful, however cutting without leaves will expand, however, it may take a bit longer since it can’t produce any additional energy from photosynthesis that is conducted by putting the leaf in the cutting.
It is equally important that you cut your cut cleanly and ensure that the scissors or knife is completely clear.
An effective method to clean the edge of your shear or cutting blade is to apply rubbing alcohol and to also keep the blade in place for a few seconds in a fire.
This way, you can be sure that there aren’t contaminants and no pathogens moving from plant to.
When I first began to be more interested in plants, I was
The Most Common Issues With Philodendron Sodiroi
Philodendron Sodiroi is susceptible to flooding and overwatering, just like other houseplants.
The most dangerous thing you could most likely do is to drown your plant with the wrong mix of potting.
So, the soil will remain extremely wet and then become soggy.
This can lead to root rot in a matter of days.
The signs of excessive watering include green leaves that are yellow and slow growth. If you observe any of these symptoms, I recommend that you examine the roots of the Philodendron Sodiroi.
All Philodendrons can be infested by pests. Pest infestations are an affliction for every gardener or plant lover.
The most frequent types of infestation include Spider Mites, Mealy Bugs, Gnats, Thrips, Scale and Whiteflies.
I attempted to simplify your life by writing an in-depth article on all of these pests. It is easy to click the links below.
Pro Tips: The best way to eliminate the bugs from finding an infestation earlier is to apply Neem oil Castille soap and an alcohol solution that is diluted.
Additionally, spray all the foliage of your Philodendron Sodiroi weekly with water and make use of a lot of pressure.
Some of these insects will easily be removed by water. Most will not enjoy the humidity.
Check out my advice below to help keep your Sodiroi issues at bay.
Tips to ensure that you’re the plant X is in good health
How can you maintain your Philodendron Sodiori flourishing? I’ve compiled the most crucial tips and tricks I have learned from my own experiences.
The Best Soil
Beginning with the right soil. When I began my hobby, I was not aware of how important the correct soil mixture is.
I have lost several plants in my house and was unable to save many plants from root decay after treatment for months.
The issue was that the majority of the soil that I was using at first was not quick draining.
I was thinking that my soil isn’t the best, but I’m certain that the plants will be fine in the end.
I could not have been more wrong, as the soil that is too compact and where no air pockets can form could cause root decay on Philodendron as well as Monstera plants.
Philodendrons tend to be more accommodating and tolerant, but only a little. Investing in a quick-draining potting mix will allow you to avoid 90percent of issues you could face when using Your Sodiroi otherwise.
The Best Watering Schedule
If you’ve got a quality potting mix, it’s almost impossible to drown your plants because the water will evaporate quickly.
The Philodendron plant is a tropical plant that is native to rainforests.
In the rain forest, its frequent rains and extremely intensively. When you are watering plants each week, you should try to mimic the natural conditions.
Be sure to rinse thoroughly and ensure your water is draining swiftly. This means that when you pour water into the pot, you should see water dripping out from on the surface of your pot nearly immediately.
The Light Level That’s Right
The appropriate amount of light is vital to keep your Sodiroi Philodendron flourish. A lot of Philodendrons are known to do best in shade, however, this doesn’t apply to indoor conditions.
The sun’s strength outdoors, even in semi-shade is stronger than any indoor sun you could offer indoors.
Set your Philodendron Sodiroi near an open window, But not close enough otherwise, leaves may get burned by sunlight.
My preferred window orientation is facing east with some hours of direct light in the morning, as well as bright indirect sunlight for the remainder of the day.
Make sure to supplement your indoor plants with an indoor grow light, and you have created the perfect lighting conditions for your plant to flourish.
I’m talking about soil, watering, as well as light. These are the three most crucial aspects to consider from my standpoint.
Fertilization, humidity, and all other elements are also important but they do not immediately have a positive or negative impact on the Philodendron Sodiroi.
Let’s review what we’ve learned about Philodendron Sodiroi Care.
There was the smaller Philodendron Sodiroi offered in the hobby. There was no discernible distinction between them.
It was frequently called Mini Sodiroi in the hobby.
If you bought a herb called a Philodendron Sodiroi, you will either get the biggest ever-growing type of the less kind where the size of the leaves is very small.
It was not until recent times that the decision was made to use the smaller Philodendron Sodirini to make a clearer distinction.
Both plants have leaves of green with silvery patches, however, the Sodirini remains small in terms of leaf blades. It appears like an unadulterated Philodendron Sodiroi which is kept in its juvenile form throughout its existence.
It was first introduced in the field through William Rotolante.
The Sodirini does not form cataphylls, and also has a greater intermodal distance.
Because of its small dimensions, it is more suitable for Terrarium conditions, as Philodendron Sodiroi quickly grows out of control.
Let’s review what we’ve discovered about Philodendron sodiroi.
It’s an exceptionally beautiful plant with gorgeous silvery leaves. It is not widely accessible and is still difficult to find.
If you come across a Philodendron Sodiroi for grabs, take it!
Sometimes they are available online. The best option is to join Facebook groups, Instagram and any other fancy Plant online stores that are popping up all over the world.
If you can find any I would recommend that you invest the money and purchase this plant.
It is a good idea to get them since they are gorgeous looking. The care of Philodendron Sodiroi is not difficult if you adhere to the tips for choosing the right soil, temperature, and humidity.
The most crucial thing to be sure of is the soil mix. A good soil mix will help you avoid a lot of hassles.
Commonly asked questions regarding Philodendron Sodiroi
What is the most frequent time I have to water a Philodendron?
The Philodendron Sodiroi is recommended to water it about every week, as a principle.
Dryer conditions could require water more frequently like every couple of days. However, humid conditions permit longer time intervals between waterings.
How do I choose the ideal base for Philodendron?
The most suitable soil to grow a Philodendron Sodiroi will be a hefty Aroid mix that permits air pockets to form as well as allow water to drain rapidly. Make a mixture of Perlite orchid bark Charcoal and peat moss.
How do I maintain the humidity of a Sodiroi of Philodendron?
Philodendron Sodiroi loves humidity. The presence of humidity that is above 60% will ensure that your plant will thrive.
Don’t go lower than 40% humidity since this can impede the growth of your Philodendron.
What are the most common pests that attack a Philodendron?
General pests of houseplants, such as Thrips, Mealybugs and Scale Fungus Gnats Whiteflies are infesting the Philodendron Sodiroi.
Utilizing Neem oil as well as Castille soap as regular water spraying are excellent ways to keep pests in the back of your mind.
How do I purchase the Philodendron Sodiroi?
These plants are extremely difficult to come across since they are scarce and highly sought-after.
It is recommended to look through platforms such as Facebook groups as well as Instagram for those who are interested in plants and have surplus stocks available.
Each now and then, you may also be able to locate this plant at an online store for plant products.
How can you tell the difference between a Philodendron Sodiroi and a Philodendron aspiring?
A Philodendron Sodirini is a Philodendron Sodiroi type that remains smaller.
It has tiny leaves, which are green with silvery patches but are less significant.
The intermodal distance is larger and the Sodirini is not cataphyll.
Does the Philodendron sodiroi one that climbs or crawls?
The Philodendron sodiroi can be described as a climber and is known for its vigorous growth pattern. In indoor environments, it produces new leaves about every 4 weeks.
Looking for other articles on our plant guides, then check this out