String Of Hearts Plant

Signs Of Overwatered String Of Hearts & How To Save It

Looking for a guide on Signs Of Overwatered String Of Hearts? in this article, we have arranged the solutions you can use today. if you are new here, kindly share our post with others.

let’s proceed…

In excess watering, your string of heart can cause a myriad of issues to your plants.

Overwatering is a challenge that is faced by the majority of plant owners. The positive side is that the heartstring that is overwatered can be protected in only a few easy steps.

Finding out the cause of the plant’s overwatering can be the very first thing you do towards salvaging your plant.

I’ll walk you through the step-by-step process to stop your overwatered string of hearts.

Stop watering the plant immediately. You must relocate the plant and amend the soil. Be sure to use a good drainage and watering system. If the root has been damaged extensively, you can grow the tubers and vines to create an entirely new pot of plants.

The signs of water damage can take some time to show. However, by the time the damage is apparent, it could have already been caused.

You must be aware of the signs of water loss and I’ll show you the steps to correct them.

Signs Of Overwatered String Of Hearts

Why is my string of hearts dying? | Fiddle & Thorn


An overwatered string of plants will show leaf yellowing as well as edema, root decay, and eventually the loss of plant if it is not treated. If your plant has been overwatered it will eventually lose its leaves and drop off.

Yellowing of Leaves

If the leaves on your plant have turned yellow, then it is likely that you’re overwatering your plant.

Yellow leaves are the result of an iron deficiency that is caused by excessive watering. If your plant is inundated, it can flush out certain nutrients from the soil.

Root Rot

A string of Hearts is a succulent-like plant. succulents are susceptible to root rot, which is caused by moist soil.

The result of overwatering is your soil becoming saturated and hindering your roots from Aerating.

The inability of the soil to aerate causes a deficiency of oxygen, and eventually root decay. The high moisture content of the soil can also allow the soil to host bacteria and fungi that create root rot. If the root is rotten and the leaves of the plant would begin to lose their color.

Wilting of Leaves

When the leaves of your plant start turning yellow and the issue of soil that is soaked with water isn’t addressed The leaves will soon begin to fall off. This is because the plant probably is dead.


If you notice spots of water on the leaf’s underside it is likely that the plant is suffering from edema. In excess watering, your plant may allow it to drink up liquid.

If they’re not able to expel as quickly in the same amount of water. The spots will pop up as they’ve absorbed more than they could handle. This is why brown or black spots could show up on leaves.

How To Save Overwatered String Of Hearts

Based on the extent of damage, you may choose to report or transplant the plant.

When the harm to the plant isn’t too severe the plant is not damaged, start repotting your plant.

However, if the harm to the root of your tree is significant, you might need to grow the plant.

Report Overwatered String of Hearts

Repotting can be a very delicate process that must be carried out properly to avoid plants from dying. Follow these steps to prevent your plant from dying

Avoid Direct SunlightI’m sure you’re considering putting your garden under the shade to dry the soil. But don’t do it.

The plant should be kept away from direct sunlight, as it could strain the plant more and we don’t want it.

  • Remove The Plant From Pot

Remove the plant from the pot using the soil. You may need to switch to get it out of the pot.

  • Extract Plant Roots From Soil

You can use your hands to release rootstocks of plants out of the soil. Cut off dead vines and roots.

There are white beads-like bulbs. These bulbs are aerial tubers that vines are grown.

  • Air Dry

After removing the plant, let the roots dry for a few hours, depending on how it is.

  • Make sure to fill the pot up with the correct soil mix

If you notice fungal growths on top of your soil, it is possible to treat the soil with an oven or other method. Fresh soil means new nutrients.

You may also opt to make use of completely new soil mix if don’t like the previous one. A succulent soil mix would be ideal for the string of hearts.

  • Ensure Proper Drainage

Make sure your pot has drainage holes to stop the soil from retaining liquids.

If your pot doesn’t contain drainage holes you could utilize rocks in the bottom of the pot.

  • Place The Plant in Pot

Once you are sure that the root system is dry you can place them in their new location. Fill the pot around 3/4 of the way, then put those healthy plants in its middle. fill the pot with soil.

  • The soil needs to be watered

After you have planted the healthy tubers you can water the soil.

Repotting is not recommended when the plant is in dormancy such as in winter because it could reduce the growth rate of your plant. The best time to pot your plant is during the spring season.

How to Propagate An Overwatered String of Hearts

If the damage caused by your garden is severe, there is the need to spread the plant.

Propagation is the process of generating new plants using the surviving tubers and vines of the plant dying.

There are two methods by which you can create a string of hearts. It is possible to either spread the string using

  • Methods for propagating soil or
  • Method of propagation of water

Soil Propagation Method

Let’s look at how the process of propagation through soil is accomplished with vines.

  1. Make a soil mix that is suitable for the plant. You can plant it in a tray, or pot. The mix must be light.
  2. Cut off a few healthy, healthy vines that have nodes each from your dying plant.
  3. Place your plants with nodes in your mix. You can utilize a stick as a support to your plant so it isn’t prone to moving.
  4. Be sure that all leaves are in the soil, to avoid decay that could impact the development of your vine.
  5. The soil should be soaked to make it wet. Avoid overwatering.
  6. Give it 3-4 weeks. It should be possible to see growth.
  7. Once you have them you can move them to a pot using an organic soil mix.
  8. Feed your plant with water and observe it develop.

It is also possible to make use of tubers that resemble beads, which are growing alongside the vines for propagation. Follow these steps

  1. You will likely see white beads-like tubers growing on your plant. Remove the vines with tubers from the dying plant.
  2. Find potting soil and put tubers in the soil. You can use the soil that you have in your primary pot.
  3. The soil should be soaked to make it wet.
  4. For 3-4 weeks, leave it and watch it sprout new roots.
  5. Make sure that the plant receives indirect lighting during this time.
  6. The tubers will grow new roots. In this stage, it is possible to cut the branches.
  7. It is now time to start planting roots in pots filled with an earthy soil mix.
  8. Water and feed your plant, and see it flourish.

Water Propagation Method

It is a simple method and can be accomplished by using vines. This might not fit with the traditional wisdom of not the giving of a string of hearts lots of water, however, it certainly works.

Follow these instructions to propagate your plant, and then save it from extinction:

  1. Cut off a few healthy vines from your garden and then remove the leaves from the vines.
  2. Take a glass filled with clear water, put an opaque plastic over it and poke a few holes into it.
  3. Cut the vines and put them into the holes you’ve made.
  4. Place the glass in a place where the plant will receive indirect sunlight that will aid in growth.
  5. Give it 3-4 weeks before you begin to produce roots.
  6. When the roots have grown out, make an area with a lush soil mix for planting.
  7. Plant the vines using the newly-grown roots and plant them in the pot you have chosen.
  8. Feed and water and your plant will grow.

Note that propagation of any kind must be conducted during the springtime. This is due to the time when the plant is in full growth.

Source: University of Wisconsin-Madison

How To Water String Of Hearts

How to Water Plants When You're Away on Vacation

There are a variety of factors that can impact the development that your plants experience when you water them. It is important to consider the following factors when you water your plant:

Watering Frequency

A string of Hearts is a succulent-like plant and therefore does not need much water.

They conserve water in their leaves and roots which makes them in a position to last for extended periods without water.

Overly frequent watering could kill your plant, so make sure that the water is draining through those drainage holes.

Make sure the soil around your plant isn’t wet before watering. I suggest watering your plants at least once every two weeks in summer.

If you live in winter, make sure to water your plants at least once per month during winter since the plant will be dormant during this time.

Watering Rules

Different people tend to water their plants in different ways. Certain people water their plants starting from the top. In this instance, the soil is watered extensively until the water is in the middle of the container.

Others prefer to use water from below. In this scenario, the pot is set in water and left to sit in the water until it is full.

I would recommend that you water your plant from the bottom because you’ll be able to ensure that the soil will only absorb what it could and not hold on to excessive water.

Water Quality

The quality of water that is used for watering plants is crucial. In some areas, water has the highest levels of fluoride and chlorine that can harm the development that your plants.

I would suggest that using rainwater that has been filtered and avoiding making use of water softeners.

You could also place your water in an empty bucket and let it sit for several days to decrease the chlorine and fluoride content before you use the water to water your plants.

You might also enjoy: Snow Queen Vs Marble Queen Pothos

Common Mistakes People Make When Watering String Of Hearts


This is a frequent mistake made by many. It’s responsible for many of the problems gardeners have to deal with. It is easy to drown your plant.

The excess water that is absorbed by the soil around a heart-shaped string could cause root rot, which if it is not addressed could cause death to the plant. If you are unsure, it is better to water less often than more frequently. It is also possible to water from below since the plant can only hold the amount it can carry.


Due to the fear of overwatering Certain people risk submerging their plants. A light amount of watering will not permit the water to penetrate deeply enough to reach the roots.

Insufficient watering can hinder the growth of the root. It is important to thoroughly water your plant to ensure that the soil is adequately watered.

Inconsistent Watering

It can be caused by excessive or inadequate watering of your plant. The plant requires patience and consistency to flourish. Make sure you come up with an agenda and stick to it.

It won’t help your plant to be watered twice in the week, then let it go for more than one month only to go back to water it twice a day for two days.

Waterlogged Soil

It is an outcome of watering too much an area and lack of drainage. If your soil is drained the plant is in danger of developing root decay.

This is the reason it is essential to employ an area with drainage and to avoid overwatering your plant.

Watering Leaves And Not Roots

A few people do find themselves watering on their plant’s leaves, only to forget about the root. They could cause an over-watering of the plant, which can cause an increase in wilting.

Make sure you take note of the root systems of the plant when you water it because this is the main basis of life for your plants. Try watering your plant from the bottom.

Watering During The Heat Of The Day

When you water your plants in the morning it’s a futile effort. The water is likely being heated by the sun and then evaporates before it has enough time to reach the soil.

It is recommended to water your plant in the early morning to ensure that the water has the chance to soak into the soil.

Using Bad Quality Water

The quality of the water is an important aspect when it concerns water. Water that contains an excessive amount of chemicals, such as chlorine and fluoride can cause harm to your plants.

As I said earlier it is possible to make use of water that has been filtered or rainwater for watering your plants. Avoid the use of water softeners because they can be damaging to your plants.

Common Mistakes in Watering String of Hearts

Best Time to Water Plants | When to Water Plants

No. Common Mistakes in Watering String of Hearts How To Avoid Them

1 Overwatering Be sure that you don’t overwater by ensuring that the soil is dry before when you are watering your plants. It is also possible to water your plant from the bottom.

2 Underwatering Make sure to water your plant well and make sure that the water soaks into the soil thoroughly.

3 Inconsistent Watering Make sure making sure to water the plants once every two weeks. You can create your schedule to help maintain a track.

4 Soil that is contaminated by water Beware of overwatering and use an aerator

5 The roots are not watered, but the leaves. Be aware of the roots of your plant while watering. Try applying water from below to ensure water can reach the roots.

6 Drinking water in the day’s heat Makes sure to water your plants each early morning.

7 Water that is not of good quality Use filtered or rainwater and steer clear of softeners for water. You can also place water in the bucket and allow it to rest for a few days to lower the chlorine and fluoride levels before making use of it to water your plants.

Frequently Asked Questions

Q: What is the reason my heart string shrivelled?

The strings of heart are a succulent-like plant that stores water within their leaves. The leaves are generally slightly on the thick side. If your heartstring is shrinking, it is probably not watering the plant.

Q What is the reason my heart string is being ripped apart?

AA’s most common reason for the dying of a string of hearts is the over-watering. If your plant is being overwatered, it causes root rot that can result in the demise of your plant. When you realize that your heart-shaped string is dying, be sure to plant a new pot or grow in time.

Q: Why do my plant leaves look wrinkled?

wrinkling on leaves of plants can be caused by an absence of water. Although an excess of water could be harmful to plants but a deficiency of water can cause serious harm to your plant. Lack of water could hinder the growth of the plant’s roots.

Thank you for reading our post about the reason why monstera not growing new leaves. if you have any questions, kindly comment below. we are happy to help you. Consider sharing our content with others

Please check out more guides from our blog:

Guide on Why Are My Fiddle Leaf Fig Leaves Wrinkling?

Can I Use Succulent Cactus Soil For Other Plants?

Best Grow Light For Fiddle Leaf Fig

Best Plants For Leca

Leave a Reply

Back to top button