Snake Plant

Snake Plant Leaves Curling? How To Fix It Fast In 2022

Snake Plant Leaves Curling? It is important to identify the root cause of your snake plant’s curling leaves. You can identify the root cause of the problem by looking for signs of stress in your plants.

Curling leaves on snake plant leaves is a common problem. Insect infestation is the most common reason for leaves curling on snake plants. Curling leaves can also be caused by overwatering, cold stress, fungal infections, and other factors such as too much water.

It is not difficult to determine which issue is causing your snake plant’s leaves to curl. However, it is crucial if you want to fix the problem. Learn how to solve the problem and why your snake plant leaves to curl.

Causes and Solutions

Many sansevieria plant

Curling leaves can be caused by insects, fungus and poor watering. This is the main reason why leaves curl because snake plants are more susceptible to pests such as thrips.

Snake Plant Leaves Curling from Insects and Pests


Thrip infestation is the most common problem for snake plants. These tiny black insects love to eat the whole plant, including its leaves, stems, and buds. Thrips can damage plants by entering the cell walls and causing them to feed. The damage to the plant can cause its leaves to curl.

You can identify thrips by the way they feed. Thrips can cause tiny black spots on the leaves and buds of snake plants. If you suspect you may have thrips try to identify the black spots. You can magnify the problem to confirm it.

A good way to spot thrips in your plants is to shake them over a piece of white paper. You might have a Thrip Infestation if you find tiny black bugs.

Once you have identified the pest, you can begin to fix it. Remove all infected leaves from your snake plant to get rid of thrips. You will need to remove all dying and dead leaves using a sharp knife.

Keep the curled leaves if they are still healthy and looking good. Once you have removed any dead leaves, make sure to dispose of them away from other plants. Next, wipe your snake plant leaves with a damp cotton ball or cloth. To remove any bugs, make sure you clean both sides of the leaf.

You should dispose of all plants that have been affected by thrips, even if they are already dead. Cross-contamination can lead to the rapid spread of an infestation. The snake plant is tough so if you see curling leaves due to a trip infection, it can usually be saved.

Mealybugs And Spider Mites

Mealybugs and spider mites are common in snake plants. These pests feed on the snake plant’s sap through its stem. These pests can cause small injuries to the plant that make it weaker and prevent it from storing enough water. You will notice leaves falling off in more severe cases of infestation.

You can identify spider mites by placing a piece of white paper under a plant and shaking it. You can identify the source of stress in your snake plant by looking for small, rotund, black mites.

Spider mites can be easily treated by wiping the leaves with warm water. This is the best way to get rid of spider mites from their most common hiding place. Use a damp sponge to treat the whole plant. You can spray the plant outside with a hose if you want a quicker solution. It might take several applications to get rid of a heavily infested plant.

READ ALSO:   Moonshine Snake Plant Care 2021 - Beginners Guide

The common mealybug is a problem that can cause stress to snake plants. They are easily identified by their flat, waxy soft bodies. These bugs are oval-shaped and have segmented bodies that are typical of grubs. Meaty bugs can be identified by their white, cotton-textured eggs in an advanced infestation.

Once you have identified the problem, you can begin to remove them by hand. This can be used to treat a localized infestation. You can also use a water bath to remove larger infestations.

Insecticidal soap can be used to treat your mealybug or spider mite infestation. By penetrating the bugs’ exteriors and causing an imbalance of electrolyte levels, insecticides aid the plant in its recovery. The plant will be inhospitable to mealybugs and spider mites.

An alternative to spraying insecticides is a soap-based solution. A combination of dish liquid and water can be used to spray the plants indoors. This will reduce the number of bugs infested. Soapy water kills eggs and adults and suffocates them.

I have written an article about how you can get rid of houseplant bugs naturally. This article is full of useful information that will help you eliminate all types of insect infestations with natural methods that actually work.

Snake Plant Leaves Curling Is Caused by Fungus

Brown Spots on My Snake Plant

Fungal issues can cause snake plants to curl. Red leaf spot and southern blight are two common problems that can affect snake plants.

This problem can be identified by looking for signs such as curling leaves and plant stress. Red leaf spots can cause red lesions on leaves or white web-like growths. The curling leaves can become hardened and darkened in the later stages of this fungal disease.

Follow proper watering procedures to alleviate fungal problems. The best way to alleviate a fungal problem is to keep the environment dry and provide well-drained soil at ideal temperatures.

If you are unable to save the plant from a serious fungal infection, it is best to dispose of it in an area that is far away from any other plants. If the plant is infected with a serious fungal disease, you can try propagating or repotting it. It is possible to save some of the plant while removing the most infected parts.

It is important to take into account the soil conditions and container size when repotting a serpent plant. To ensure that the snake plant is repotted at the same depth as it was growing before, For efficient water absorption, the root ball should be positioned one to two inches below a pot rim.

Once you have placed the snake plant into a new container, be sure to add or take out enough soil to ensure that the root ball is at the correct depth. The soil should drain well and contain adequate nutrients to support the snake plant. If you want to provide the best environment possible for your snake plant, consider using fertilizer in the soil.

You can save some of your snake plants by propagation if you believe that fungus is to blame. Because they can be quickly established, propagating snake plants is simple.

First, make sure you choose a leaf that has not been infected with fungus. To prevent cross-contamination, make sure you wipe the leaf clean before placing it into another container. After cleaning the leaf, trim a 3-inch section and place it in moist soil. For the next few weeks, keep the soil evenly moist until you start to see growth.

READ ALSO:   Snake Plant Benefits - 10 Amazing Benefits Of Growing Snake Plant

You may be surprised to find your snake plant doing well after propagation. This plant’s variegated leaves mean that it can grow in many environments and will not need to be trimmed.

Snake Plant Leaves Curling due to Watering Problems

Overwatering can cause the curling of leaves in snake plants. The roots of a snake plant can become waterlogged if they are overwatered. Roots that are waterlogged can cause the plant to rot or even die.

To identify the problem, you need to examine your soil content and watering schedule. You are likely to cause water-logged roots or leaf curling if you water your snake plants more often than once every other day. The same problem could occur if your soil is clay-based and dense.

You can prevent snake plant leaves from curling due to water stress by watering them on a regular basis. Snake plants do not require water until their potting soil has almost dried.

Regular watering can cause additional stress for your snake plant. It is possible to also change the soil. Your soil should be sandy and well-drained. A good mix of cactus and soil is ideal for creating a habitat for snake plants.

The Cold Damage Causes Snake Plant Leaves to Curl

Snake plant leaves can curl due to cold damage. You can damage the leaves of your snake plant by leaving them outside at low temperatures. This can lead to curling, wilting, and scarring.

Snake plants thrive at temperatures between 50 and 85 degrees F. It is easy to maintain the correct temperature with this wide range of temperatures. Keep an eye out for low temperatures if plants are left outside for any part of the year.

The Ultimate Care Tips for Snake Plants

Snake Plant Benefits

A good care plan that considers the plant’s habitat requirements is one of the best ways to prevent your snake plant from curling its leaves.

Plant stress can be caused by insecticides being applied to plants and repotting them to avoid cross-contamination. Stress can lead to problems with houseplants. Consider the following conditions to ensure that you create the strongest and most durable snake plants.

  • Bright, indirect sunlight
  • Sandy soil that is well-drained
  • Once the potting media has dried, water
  • Humid environment
  • Temperature 50 – 85 degF

Is there a quick way to check if my snake plant has thrips?

Sticky fly paper placed near the snake plant will attract them quickly. This is a great way to check if your snake plants are curled from thrip infestation.

Can my snake plant recover after severe wilting?

Snake plants can withstand a variety of environments and are resilient. According to gardeners with experience, they are capable of bouncing back from near death. You can save your snake plant if it is in trouble. You might be able to revive it.

Why do snake plant leaves curl?

Curling can occur if the plant is left dry for too long. Although your Sansevieria can withstand drought, it doesn’t mean that you should forget about it. You must ensure that you don’t overwater or submerge your plant. You should maintain a regular watering schedule. Water when 50% of the soil is dry.

What does an overwatered snake plant look like?

Overwatered snake plants will display signs such as drooping leaves, yellowing leaves, and falling over. To save your snake plant’s life, take it out of its pot and remove any rotting roots. Place the plant in a bright, indirect area.

READ ALSO:   Snake Plant Care: How To Care For A Snake Plant

Why are my snake plant leaves bending?

african american fashionable man in hat checking time while sitting on black sofa

Many home gardeners complain that their snake plant leaves are falling over or bent randomly. This is usually caused by excessive watering, poor repotting techniques, and lighting problems. The mother-in-law plant, like all succulent plants, stores water in its leaves.

How do I keep my snake plant upright?

The Snake Plant can fall over several times per year as it grows. might be used to attach your leaf to the stake, depending on its height and weight. Jute string is a great choice because it’s strong, cheap, and doesn’t seem too intrusive. The leaf is propagated in a separate container.

Is my snake plant getting too much sun?

prefers indirect sunlight, but snake plants can survive in direct sunlight.  Your snake plants will tell you if they are getting too much sunlight. You can move your snake plant a few feet away if you notice that its leaves are changing colors.

How do you know when your snake plant needs water?

It is easy to care for snake plants. Keep your snake plant looking its best by watering it when the soil is dry. To tell if your plant needs watering, you should touch the soil once a week. It’s time for watering when the soil is dry to the touch.

Why is my snake plant not growing straight up?

The main reason a Snake Plant doesn’t grow straight up is that the light is coming from the sides and the plant is moving towards the light. Over time, this will cause the leaves to turn towards the light source.

How often should you water snake plants?

watering, watering can, man
Photo by nguyenkhacqui on Pixabay

You won’t need to water your plant more than once every 10 days (at most) during the growing season, even if it’s in plenty of bright indirect light. Watering might be as seldom as once a month during the cold months or if the plant is in low light.

What do you do with a drooping snake plant?

When a plant’s leaves droop, it’s time to repot or transfer it; this happens when the plant gets too much water. Remove it from its pot or dig it up, rinse off the old soil, and replant it in fresh potting soil or an outdoor spot with greater drainage.

How long can snake plants go without water?

Sansevierias, sometimes known as snake plants or mother-in-tongues, law’s are the polar opposite of other plants that are high-maintenance and borderline dramatic (cough, cough: the fiddle-leaf fig). Indeed, these dependable greens are so hardy that they may survive for up to two weeks without water.

How do I make my snake plant grow more leaves?

Place your snake plant in a spot that receives plenty of bright, indirect sunlight if you want it to produce additional leaves. The more strong light you provide this plant, the more it will grow and appear better.

How many snake plants should be in a bedroom?

To properly benefit from snake plants’ air purification abilities, NASA recommends placing at least one plant every 100 square feet of space. You may require 2-4 snake plants for your room, based on the usual standard bedroom size.

Looking for other articles on our plant guides, then check this out

Why is My Zebra Plant Leaves Turning Brown?

cobra fern plant care guide

Pothos Plant Care

Why is my asparagus fern yellowing?

Why Are My Caladium Leaves Curling?

Here are the five steps to take to care of a snake plant

Leave a Reply

Back to top button